Quoted within 48 hours. Machined overnight. Inspected before sunrise.
TORRANCE, CA — ALUMINUM ONLY — NOW QUOTING
ITAR Registered
CAGE 23PQ1
SAM.gov Active
Matsuura MX-330
AS9100D In Progress · Stage 1 Jan 2027
CMMC Level 2 In Progress
WHY LIGHTS-OUT
The algorithm holds the tolerance. Software keeps the shop running through the night.
We didn't put computers in a machine shop. We taught software to run one. Quoting, cutting, measuring — one digital thread from CAD file to shipped part. Tolerance isn't held by a steady hand at 4 a.m.; it's held by code that never gets tired. Every part leaves with its history attached: every feature measured, every lot traced, nothing on paper.
HOW THE NIGHT SHIFT WILL RUN — LOS ANGELES SOUTH BAY
23:47
Toolpaths verified. Doors close. The floor goes dark.
01:20
MX-330 runs op 3 of 5. Unattended.
04:58
In-process probe checks every feature. All in tolerance.
06:30
Inspection report in your inbox before your first coffee.
EQUIPMENT & CAPABILITY
5-axis
Simultaneous machining
10
Pallets per MX-330 cell
24/7
Lights-out by design
±0.0005″
Tolerance capability
01
Complex multi-surface geometry cut in a single setup — repositioning error engineered out.
02
A 10-pallet pool runs unattended overnight — parts staged before the morning shift arrives.
03
±0.0005″ capability, with in-process probing checking every feature mid-cycle.
04
Aluminum only: 6061-T6, 7075-T6, and MIC-6 plate. That focus is why we're faster and tighter.
Our first Matsuura MX-330 5-axis cell, with a 10-pallet automated pool, is running now, and an identical second cell arrives in February 2027. Identical configuration means one tooling catalog, one CAM library, and synchronized maintenance — simplicity that translates directly into consistency and uptime.
View Equipment & Technology